
AD3D Transport Solution (Below Zero)
openmods.json (add-on-of, dependencies)
link
github.com/AndreaDev3D/SubnauticaModA suspended monorail for your base: place pylons and the rail builds itself between them, on land or under water. Ride the pod, haul cargo wagons and carry your Prawn Suit.
group Developer Links
collections Gallery
AD3D Transport Solution (Below Zero)
The Below Zero edition of AD3D Transport Solution: a suspended monorail for your bases. Place pylons and the rail builds itself between them, over land or along the sea floor. Hang a pod on the rail and drive it, couple cargo wagons behind it, and take your Prawn Suit along on its own carrier.
First test release. This is the first public build of the monorail. Expect rough edges, and please report what you find.
Features
- Monorail Pylon (Titanium ×4). Build pylons 4 to 50 m apart: each new pylon lays a rail to the nearest free one. Rails climb up to 25° and turn up to 60° at a pylon, so the line can follow the terrain.
- Telescoping pylons. The Up and Down buttons on a pylon raise the rail in five steps, from about 4 m to 13 m. Rails and anything riding on them follow.
- Monorail Pod (Titanium ×6, Glass ×2, Wiring Kit, Lubricant). An enclosed, dry cabin for one. Aim at a rail to build it, click it to board, then use forward and back to drive at up to 10 m/s. You can breathe inside, also under water.
- Call button. Press the call box on any pylon and the nearest free pod drives itself there, wagons included.
- Monorail Cargo Wagon (Titanium ×5, Lubricant). A 6 × 6 cargo hold with doors on both sides. Back a pod into it to couple it; click the wagon to uncouple.
- Monorail Prawn Carrier (Titanium ×6, Wiring Kit, Lubricant). Walk a Prawn Suit onto the deck and get out to lock it on. It rides with the train and slowly recharges; get back in to unload.
- Works above and below water. Everything is in the Habitat Builder under Exterior Modules and unlocked from the start.
- Designed for Below Zero. For Subnautica, use AD3D Transport Solution (Subnautica).
Installation
- Install BepInEx and Nautilus for Below Zero if you haven't already.
- Download
AD3D_TransportSolution.BZ.zipfrom the releases page. - Unzip into your Below Zero
BepInEx/pluginsfolder. The final path should look like:SubnauticaZero/BepInEx/plugins/AD3D_TransportSolution.BZ/ - Launch the game. The monorail parts appear in the Habitat Builder.
Known limits
- A pylon carries at most two rails, so a network is a single line (a loop works); there are no junctions yet.
- There is no preview of the rail while you place a pylon.
- Pods and wagons ignore the builder's rotation: they face away from you.
- The pod needs no power yet.
Compatibility
Designed as an add-on for the AD3D base mod (modId 26 on OpenMods). See the manifest for the exact dependency pins used per release.
Join the conversation
Log in to join the conversation
Connect with GitHub to post comments and react.
No comments yet — be the first to share your thoughts.
Versions
View AllProject Metadata
1
5
Supported Games
Tags
Required Dependencies
For latest release: v2.0.9







